Engine Mount for Ford Mondeo

Now, Let Dongna share the steps and difficulties

Send Inquiry
Product Details

1. How to install your engine mount?

Now, Let Dongna share the steps and difficulties

1) first, the deputy water tank from the steel clips from the clip, the first demolition close to the tire of the steel clips, this simple, two hands to lift on the line, pay attention to grasp the strength of slowly, in case of accidents; after dismantling the clasp of the auxiliary cab, Insert a screwdriver into the two sides of the protruding part of the steel sheet to the side of the auxiliary cab to pry a bit of force to expand the plastic card hole expansion at the same time the other hand holding the bottom of the tank slowly up and then pull out



2) second, prepare a solid block of about 10cm wide, remove the car with the jack to the bottom of the oil pan, place the block between the oil pan and the jack, and then lift the jack until a little top of the engine (this is to dismantle the stent to replace the support of the engine, or even if the stent can not be removed). Next, remove the engine dust cover and put it aside for easy operation, loosen two nuts in the upper bracket (these two nuts are quite tight, finally rely on the tire wrench using pole to use the milk to wring out and remove it, and then unscrew the two screws and remove the Panasonic; a screwdriver to pry the air conditioner on the bracket with the metal clamp near the engine side, Then push the clamp to the cab and pull it out of the bracket. After the appropriate reduction of the jacks to facilitate the removal of the old stent, and then plug in the new stent, where the problem, the upper bracket card does not enter two protruding screws, and then slowly adjust the jack height and hammer and iron pestle slowly put the stent into, until the nut can be screwed up to some so far, Then use the torque wrench press 80Nm torque multiple times slowly tighten two nuts, and then use a screwdriver inserted into the bracket rubber body on both sides of the gap to estimate whether the two sides of the space is consistent, such as inconsistent to move a little bracket back and forth (at this time the stent is not fixed on the frame, Although the engine is top but can still slightly move a little distance to adjust the gap, and then the following two screws also press the 80Nm torque several times to tighten slowly.



3) Finally, remove the jack and block, reset the air conditioner tube clamp and the auxiliary water tank, cover the engine dust cover and engine room lid, finish the tool


2. Product details

Item Name         

Engine Mount, suspension engine mount, engine mounts

OEM NO.             


Car Model / year

FOR  Ford Mondeo MK III year 2000-2007


100 PCS

Placement on Vehicle

Left, Right, Front

Payment Terms

T/T, Western Union, D/A, L/C

Product Guarantee

30 000km or 1 Year

Delivery Time

1. Sample: within 2 days after received sample cost

2. Mass: 30-50 days after received deposit


1.neutral packing or as customer require  2. POWERTRAC packing

Loading Port

Ningbo Shanghai or customer pointed port

3. our POWERTRAC brand packing



As one of the world’s largest automotive parts suppliers, our parts are trusted every day by mechanics and vehicle owners worldwide. Powertrac Engine mount is manufactured and tested to the strictest OE standards for life cycle performance. Built for trouble-free ownership and 100% visually inspected and quality tested, this engine mount is backed by our 100% satisfaction guarantee.









●Guaranteed Exact Fit for easy installation

●100% BRAND NEW, premium ISO/TS 16949 quality - tested to meet or exceed OEM specifications

●Engineered for superior durability, backed by industry leading warranty


6. This item is backed by our 100% satisfaction guarantee, and our industry leading warranty. If you need any assistance, or just have questions, please do not hesitate to contact us. We are dedicated to providing you with all of the information you need to make a confident purchase, and we continue to support you after your purchase.

This part may also be known as: engine mount, engine mounting, engine mounts


Position: Service manager

Dep.: Sales department

Name: Mrs Christine Li

Email: sales@eastredparts.com

Skype: fei820914


Office phone:+86-576-87477807

Office fax:+86-576-87477663


2. Service manager -- cristine Li.jpg  


Hot Tags: engine mount for ford mondeo, China, suppliers, manufacturers, factory, wholesale, buy, cheap, price, low price
Related Products