Engine Mount for Hyundai Sonata

first, the deputy water tank from the steel clips from the clip, the first demolition close to the tire of the steel clips, this simple, two hands to lift on the line, pay attention to grasp the strength of slowly, in case of accidents; after dismantling the clasp of the auxiliary cab, Insert a screwdriver into the two sides of the protruding part of the steel sheet to the side of the auxiliary cab to pry a bit of force to expand the plastic card hole expansion at the same time the other hand holding the bottom of the tank slowly up and then pull out

Send Inquiry
Product Details

1. How to install your engine mount

Now, let’s talk about the steps and difficulties

1) first, the deputy water tank from the steel clips from the clip, the first demolition close to the tire of the steel clips, this simple, two hands to lift on the line, pay attention to grasp the strength of slowly, in case of accidents; after dismantling the clasp of the auxiliary cab, Insert a screwdriver into the two sides of the protruding part of the steel sheet to the side of the auxiliary cab to pry a bit of force to expand the plastic card hole expansion at the same time the other hand holding the bottom of the tank slowly up and then pull out

1.1)第1张.jpg

1.1)第2张.jpg

2) second, prepare a solid block of about 10cm wide, remove the car with the jack to the bottom of the oil pan, place the block between the oil pan and the jack, and then lift the jack until a little top of the engine (this is to dismantle the stent to replace the support of the engine, or even if the stent can not be removed). Next, remove the engine dust cover and put it aside for easy operation, loosen two nuts in the upper bracket (these two nuts are quite tight, finally rely on the tire wrench using pole to use the milk to wring out and remove it, and then unscrew the two screws and remove the Panasonic; a screwdriver to pry the air conditioner on the bracket with the metal clamp near the engine side, Then push the clamp to the cab and pull it out of the bracket. After the appropriate reduction of the jacks to facilitate the removal of the old stent, and then plug in the new stent, where the problem, the upper bracket card does not enter two protruding screws, and then slowly adjust the jack height and hammer and iron pestle slowly put the stent into, until the nut can be screwed up to some so far, Then use the torque wrench press 80Nm torque multiple times slowly tighten two nuts, and then use a screwdriver inserted into the bracket rubber body on both sides of the gap to estimate whether the two sides of the space is consistent, such as inconsistent to move a little bracket back and forth (at this time the stent is not fixed on the frame, Although the engine is top but can still slightly move a little distance to adjust the gap, and then the following two screws also press the 80Nm torque several times to tighten slowly.

1.2)第1张.jpg

1.2)第2张.jpg

3) Finally, remove the jack and block, reset the air conditioner tube clamp and the auxiliary water tank, cover the engine dust cover and engine room lid, finish the tool

1.3).jpg

2. product details

Product name

Engine Mount, motor mount, motor mout rear

Our model

DN-EM13024

OOEM NO.

2193034300  21930-34300

Application

Ford Hyundai Sonata year 94-

Brand

POWERTRAC

Certification

ISO 9001 : 2000  ISO / TS16949

Size

As per oem

Warranty

12 months or 30000kms

Origine

Zhejiang of China

MOQ

100 Pieces

Delivery time

20-60days depend on quantity

Payment

T/T, L/C, trade assurance

Port

Shanghai/Ningbo/yiwu

Packing

Powertrac or neutral packing or as require


3. our related products show

3..jpg

4. rubber material manufacturing vedio

5. our certification&patents

5..jpg

6. factory show

img12026.JPG

Our workshops

6.第2张.jpg

6.第3张.jpg

6.第4张.jpg

6.第5张.jpg

6.第6张.jpg

6.第7张.jpg

7. our brand packing photo

7. 第1张(001).jpg

7.第2张(001).jpg

7.第3张(001).jpg

8.  Dongna Promise

1).Revert to any inquiry within one day
2). Provide a competitive and reasonable price
3). Precise High-Quality Guarantee 
4). Prompt delivery
5). Small orders accepted
6). Packing according to customers requirements, but usually box inside and wood pallet outside is very strong.

 

9. Any interesting, please contact us for more detail , thank you !

 

Position: Sales man

Dep.: Sales department

Name: Mr. mars Su

Email: sales@eastredparts.com

Skype: fei820914

Whatsapp:+86-15958606125

Office phone:+86-576-87477807

Office fax:+86-576-87477663

HTTP://www.eastredparts.com

5. salesman -- mars Su.jpg

Hot Tags: engine mount for hyundai sonata, China, suppliers, manufacturers, factory, wholesale, buy, cheap, price, low price
Related Products
Inquiry